Arrow-Master, inc. - Vibratory Concrete Screeds - Aluminum 'A' Frame

Vibratory Aluminum Gas Powered Self-Propelled Screed
- Controls Require Only One Operator -

STANDARD:

Hydraulic Powered Twin Drive Winches. Includes 5' base unit with end sections, and carrying handles.
(Provide for One Person Operation.)

OPTIONAL:

The gas-powered aluminum screed with hydraulic drive is expandable up to 60 linear feet. Sections are available in 2-½', 5', and 7-½ foot lengths for greater job flexibility. Lightweight aluminum structure weighs only 12 pounds per linear foot, and the all-bolted construction makes for easy and simple on-site maintenance. Our unique CURL EDGE runner increases production by eliminating concrete roll-over, improves final finish and yields a more uniform concrete spread. Available with 8 hp Honda or Briggs engines. In addition, all screed packages come complete with end sections, and lifting handles can be used with any Arrow-Master Aluminum-type screed sections. Give us a call at 1-800-325-4151 or for more information.

Click Picture for more Pics

Specifications
Engine Options:	Briggs 8 hp (6 kW) 3600 rpm Honda 8 hp (6 kW) 3600 rpm
Vibrations:	4200 vibrations/minute
Speed:	Variable up to 24 FPM
Grade Accuracy:	± 1/8 inch in 10 sq. ft. (3 mm in 0.9 sq. m)
Winch Cable:	140 ft. (43 m) per winch, 1/8 in. (3 mm) dia.
Recommended Slump:	Over 3 in. (76 mm)
Maximum Span:	Expandable to 60 ft. (18.3 m)
Truss (W x H):	18.2" x 16.5" (46.2 cm x 42 cm)
Runners:	Both front and trail runners are extruded aluminum
Standard:	Self-Propelled Power Unit with independent winch controls

Sections & Accessories
PART NO.	DESCRIPTION	OPERATING WEIGHT
M45096-01	2.5' Screed Section	29 lbs (13.2 kg)
M45096-02	5' Screed Section	60 lbs (27.5 kg)
M45096-03	7.5' Screed Section	88 lbs (40 kg)
M48944B	5' Base Unit, 8 hp Briggs to 60'	315 lbs (143kg)
M48944H	5' Base Unit, 8 hp Honda to 60'	315 lbs (143kg)
M45888	Wall Mount Bracket, Aluminum Screed	20 lbs (9.1 kg)
M45889	Adjustable Bracket Set	25 lbs (11.4 kg)

Curl Edge Runner
increases production, eliminating rollover, improves final finish and yields a more uniform concrete spread.

Turnbuckle
couplings allow for quick adjustment for precise flats, crowns, or valleys. The couplings are located along the entire length of the span.

Bearings and double eccentric weights
are located at each "A" frame on 15-inch centers. This provides improved stability of the shaft and vibration across the entire screed span.

Eccentric Shafts
are coupled by universal joints. This decreases strain on shafts, weights, and bearings, and allows the screed to be adjusted for crowned surfaces.

Specifications are subject to change without notice. Photographs or drawings in this literature may include optional equipment which may be purchased at additional cost from Arrow-Master. The only warranty applicable is our standard written warranty. We make no other warranty, expressed or implied.

-Top-